Table of Contents
Advertisement
NTP server that is relevant to your network. Access the system configuration page,
under time configuration, choose NTP and specify the primary and secondary NTP
servers. Select the appropriate time zone. Click 'Apply'. The NTP servers will be tried
for a predefined number of times and if these attempts fail, the present system time
will be retained.
Note: Daylight savings time is automatically supported by DVX-1000 provided the system is
configured to get the time from an NTP server and the correct time zone is selected.
4.1.4
Setting other configurable parameters
The following options can be specified in this section.
RTP Port (Min & Max)
Operator Number
Operator User Group
4.2 Configuring the system through the Command Line Interface
This section describes the DVX-1000 system configuration through the command line
interface. Whenever the user connects to the DVX-1000 using the serial port, he will
be prompted for login name & password. The user must be an administrator to log
on to DVX-1000 & execute any CLI commands. Once the user name & password
verification succeeds, the DVX command prompt will now appear and the user can
now configure the system with the aid of the CLI commands described below.
The CLI commands are structured in tree-style architecture. All the CLI commands
are case insensitive & at any time the user can enter '?" to display what all
commands are available at this level or depth.
4.2.1
Help Command:
Command Name:
Command description:
Command Format:
4.2.2
History Command:
Command Name:
Command description:
Command Format:
D-Link Confidential
The minimum and maximum ports that DVX-1000 uses
for its media. Changing this also modifies the firewall
settings to block ports other than the ones configured.
The operator's extension that will be contacted if the
call through the automated attendant fails, or if the
caller dials an invalid extension or no extension at all.
User Group of the operator.
help
The 'help' command displays all the available
commands to the console.
help
history
The
'history'
previously executed commands in the current
session to the user.
history
9
DVX-1000 User Manual
command
displays
the
list
of
Advertisement
Table of Contents
