Table of Contents
Advertisement
5.2.3
Modifying user details.
Clicking
icon in the EDIT Column in Call Server->Users will allow you to edit
user information. All the information that is configured while adding the user, except
the 'UserId' can be modified here. Please refer Section 5.2.1 for the details regarding
the configuration parameters.
5.3 Registrations
Current user registrations can be monitored by accessing
Call Server->Registrations
The administrator may add or delete a registration if required. However, registration
through SIP messaging is recommended. The following values need to be provided
for adding a registration.
Note: A new registration for a particular userID cannot be added unless a
SIP user is configured with that ID.
User ID
Contact
Priority
Expiry Time
5.4 Configuring Gateways
Gateways are used to connect DVX-1000 to external SIP based servers or PSTN
network. DVX-1000 can be connected to other SIP servers by configuring the servers
as 'INET' gateways. DVX-1000 can connect to PSTN network through a 'PSTN'
gateway. This is not to be confused with the default gateway configured
during system configuration.
The Gateway configuration information can be viewed by clicking Call Server->
Gateways. To add a new gateway, click on 'Add New'. The following parameters are
to be configured.
Gateway Id
Gateway Type
Domain Name
D-Link Confidential
Specifies the user ID for registration. For the registration
to be successfully added, the user ID should be a
configured user in SIP users.
Specifies the contact for registration. Any SIP call to the
user identified by User ID will be redirected to this
Contact value. Example: sip:9001@192.168.100.101
Specifies the priority value for the contact. Priority value
is a value between 0.0 and 1.0, with 0.0 indicating least
priority and 1.0 indicating highest priority. This is used to
prioritize between contacts if more than one contact exists
for a user ID. Refer to Q Value in SIP RFC 3261 for more
details
Specifies the expiry time for the registration. The
registration would expire after the specified expiry time.
While adding a registration, Expiry Time is specified in
seconds, whereas while displaying current registrations, it
shows the time and date at which the registration would
expire.
A unique Gateway Id
The type of gateway. It can be INET / PSTN
Specifies the domain name / IP address of the
Gateway. This is used and the domain name/IP
Address when the call server has to register to the
18
DVX-1000 User Manual
Advertisement
Table of Contents
