Table of Contents
Advertisement
Command description:
Command Format:
4.2.26 Restore Certificate Command:
Command Name:
Command description:
Command Format:
4.2.27 Restart Command:
Command Name:
Command description:
Command Format:
5 Configuring the Call Server
The following section explains the functionality of the various call server features and
also provides information about how the features and the basic call server system
parameters are to be configured.
5.1 General Configuration
The DVX-1000 Call Server configuration information can be viewed by clicking Call
Server -> Configuration. To change the configuration, click on Edit. The following
configuration options can be changed.
Domain
Port
Default
Authentication
Default Expiry Time
D-Link Confidential
The 'show alarms' command displays alarms
being raised by the DVX.
show alarms
restoreCert
The 'restoreCert' command restores the default
SSL certificate that came installed with DVX-
1000.
restoreCert
restart
The 'restart' command restarts DVX-1000.
restart
Specifies the SIP domain that this server manages. This
will be used in all the SIP addresses on this server.
Specifies the UDP port number on which call server
would listen for SIP messages. Some ports are
internally used by the call server, auto attendant
and media server and are reserved. If the port
specified here conflicts with one of the reserved ports,
an error message will be displayed.
Specifies the default authentication scheme that will be
used
to
authenticate
authentication scheme is configurable per user (during
user configuration).
Specifies the default expiry time for SIP registrations.
This value will be used for registration requests when
neither the Expires header is present nor is an expires
parameter specifed in contact header. Default Expiry
Time is specified in seconds.
15
DVX-1000 User Manual
SIP
user.
Note
that
the
Advertisement
Table of Contents
