Table of Contents
Advertisement
Port
Outbound Proxy Enabled
IP Address
Port
Registration Required
SIP User ID
User Name
Password
5.5 Configuring Routes
The Route configuration information can be obtained by clicking Call Server-
>Routes. To add a New RouteGroup configuration, click on Add New. Atleast one
route should be created and added while creating a RouteGroup. The Route View
Column helps in viewing all the Routes belonging to a RouteGroup. New Routes can
be Added / Deleted / Edited from here. Routes can be moved from one RouteGroup
to another by editing a Route. All Routes except the highest priority Route can be
deleted from a RouteGroup. Deletion of a RouteGroup is possible only if it is not
being used by any user.
The following are the route configuration options.
RouteGroupName
Duration Parameters
Route Name
DestinationType
Destination Id
Priority
Min Digits
Max Digits
No of Mask Digits
Dialed Digits
D-Link Confidential
gateway.
Specifies the port number that the gateway is
configured on.
Check this box if the gateway is connected through
an outbound proxy.
IP Address of the outbound proxy.
Port number of the outbound proxy.
Check this box if DVX-1000 needs to register with
the external gateway.
SIP User ID associated with this gateway
SIP display name for the gateway user
Specifies the password associated with this gateway.
This will be used for authentication.
Specify a new unique RouteGroup Name (Max 20
Char)
Specify the time for which this Route is valid. All time
parameters are mandatory.
Specify a new unique Route Name (Max 20 Char)
Type
of
the
Route
LOCAL/PSTN/INET.
Indicates the Gateway Id corresponding to this route.
For LOCAL destination type Gateway Id need not be
specified, hence disabled.
Indicates priority of this route in its RouteGroup. The
value can be in the range of 1 to 25. If the new route
is added with an existing priority, the priority of the
old Route will be incremented to next value.
Indicates the minimum dial digits for this route
Indicates the maximum dial digits for this route.
Indicates the number of Dial Digits to be masked.
Dialed strings to be matched to select this route entry.
A dialed string of '*' matches any string of 0 or more
19
DVX-1000 User Manual
Destination.
It
can
be
Advertisement
Table of Contents
