Table of Contents
Advertisement
Command Format:
4.2.8 Set Primary DNS Server Command:
Command Name:
Command description:
Command Format:
4.2.9 Set Secondary DNS Server Command:
Command Name:
Command description:
Command Format:
4.2.10 Set NTP Server Command:
Command Name:
Command description:
Command Format:
Warning: On executing the following NTP server commands the system will assume that the
time configuration should be obtained from the NTP server and the time configuration will be
set to 'NTP server' if it is in manual mode currently. If you do not want this to happen, please
undo the change through the web page.
4.2.11 Set Primary NTP Server Command:
Command Name:
Command description:
Command Format:
D-Link Confidential
set dnsserver <primary dns server ipaddress>
<secondary dns server ipaddress (optional)>
e.g. set dnsserver 192.168.10.5 192.168.10.6
set primarydnsserver
The 'set primarydnsserver' command configures
the primary DNS server address.
set primarydnsserver <ipaddress>
e.g. set primarydnsserver 192.168.10.5
set secondarydnsserver
The
'set
secondarydnsserver'
configures the secondary DNS server address.
set secondarydnsserver <ipaddress>
e.g. set secondarydnsserver 192.168.10.6
set ntpserver
The 'set ntpserver' command configures the
primary & secondary NTP server address. It will
automatically sync the time with the NTP server.
set ntpserver <primary ntp server ipaddress>
<secondary ntp server ipaddress (optional)>
e.g. set ntpserver 192.168.10.9 192.168.10.10
set primaryntpserver
The 'set primaryntpserver' command configures
the
primary
NTP
automatically sync the time with the NTP server.
set primaryntpserver <ipaddress>
11
DVX-1000 User Manual
command
server
address.
It
will
Advertisement
Table of Contents
