Table of Contents
Advertisement
Prefix
5.6 Configuring Groups
The Group configuration information can be viewed by clicking Call Server-
>Groups. Groups can be of two types
•
UserGroup
•
Hunt Group
The user group is specifically used for determining user privileges during Call Pickup.
A particular user can pick up calls for him on another extension only if that extension
belongs to the same user group as him. A new Group can be added by clicking Add
New. A unique Id needs to be given to each Group. Group Type distinguishes
between a user group and a hunt group. The mode field is relevant only to a hunt
group. A hunt group can be configured in three modes (First Only /Sequential
/Parallel). Members in a user group are added when the user is actually added to the
call server. Hunt Group members can be added/edited/deleted by clicking the edit
button in the view members page.
A group can be deleted only if it does not contain any user.
Note: Each Group (User/Hunt Group) can have a maximum of 20 users.
Beyond this a new user group has to be created to add more users. Also, a
user can belong to a maximum of 5 user groups.
6 Using the feature manager
The following section gives an overview of what the call server features are, how
they are to be activated and what their functionality actually is.
6.1 Configuring features
Feature configurations can be viewed by following the links Feature Manager-
>Feature Configuration.
Feature prefix specifies the digit user needs to dial while activating/deactivating
feature from the phone. The default value is '*'. The feature configuration page
displays the following fields for each feature.
Feature Name
Feature Code
Edit
6.2 Activating and deactivating features
Feature activation can either be done from the web interface or from a phone.
However for certain features where additional data is essential (for
instance, a call forwarding number for call forward, or a time interval for
D-Link Confidential
elements.
Prefix to be added to the number after masking.
Feature prefix and the list of features can be viewed.
Specifies the name of the feature
Specifies the feature code. This feature code needs to be
dialed when activating/deactivating a feature from the
phone. This can be configured to be a custom number.
Care should be taken that no two feature codes conflict.
This link can be followed to change the feature code for
the feature
20
DVX-1000 User Manual
Advertisement
Table of Contents
