Table of Contents
Advertisement
Console Basics
Readout Display
A blue backlit 6.5"LCD display provides all the information you need to
monitor your exercise results and get the most out of your exercise program.
A
D
B
F
C
H
J
A. Message Window - This 16-character window helps step you through
program setup, then displays the program selected while you exercise.
The TR4000i displays pace and total feet climbed. Pace shown in minutes
and seconds per mile or kilometer, is shown in the Message Window
every time speed changes. Total feet climbed is shown in the Message
Window every fi ve minutes.
B.
Program Matrix - Divides the workout programs into 20 segments
with varying intensity levels. These programs can be viewed in levels of
incline or speed.
C. Time - The workout time elapsed or the workout time remaining.
D. Incline - The level of belt incline ranging from 0 to 15.
E.
Speed - The speed you are traveling in miles per hour (this reading can
be changed to kilometers by using the Personal Settings Mode).
F.
Calories - Estimated calories burned is calculated by using a widely-
accepted equation, using body weight and distance covered.
G. Distance - Total distance traveled in miles or kilometers since the
beginning of the workout.
H. Step Count -Works like a pedometer, counting your steps while
you walk.
30
E
G
I
K
L
I.
Heart Rate - Your measured heart rate using the hand pulse sensors
located on the front handlebars or chest strap.
J.
Date - The date is presented as the month/day/year below the program
matrix.
K. Time - The time of day is shown below the program matrix using a 24-
hour reading.
L.
Indicator icons:
Lube - This icon illuminates after 100 hours of use showing it's
time to lubricate the treadmill belt (please refer to the Maintenance
and Tips section for lubricating instructions).
USB - This will light up when your exercise data is being transferred
to a USB fl ash drive.
Cooling Fan - Indicates the fan is on - low, medium or high.
Bluetooth - Flashes when pairing with a mobile device.
HRC - This icon fl ashes when your pulse is being taken.
! !
CAUTION: The Intelli-Guard feature will automatically be disengaged
when the treadmill is operated at speeds under 1.0 mph (1.6 kph). If
the speed is within this parameter "Step" will fl ash. When the "Step"
is fl ashing, the treadmill will not automatically pause. If the speed is
above 1.0 mph (1.6 kph) Intelli-Guard™ will not activate until 25 steps
are taken and counted.
!
CAUTION: At 20 seconds the console will beep once per second
for 5 seconds and then automatically pause the treadmill. These
beeps are a notice that the treadmill belt is about to stop. If for some
reason you are still on the treadmill when this occurs move your feet
to the side rails and prepare for the belt to stop. The Intelli-Guard
feature does not replace the use of your Safety Key or using proper
precaution in stopping the treadmill when it is not in use.
Console Basics
31
Hide quick links:
Advertisement
Table of Contents
