Ib-20/Ib-21E/Ib-22 Network Interface Cards - Kyocera Mita FS-C8008DN Operation Manual

A.3.9

IB-20/IB-21E/IB-22 Network Interface Cards

Caution
Along with the standard for the network interface on the printer, the network interface card
supports TCP/IP, IPX/SPX, NetBEUI and EtherTalk protocols, so that the printer can be
used on network environments including Windows, Macintosh, UNIX, NetWare, etc. Install
the network interface card in the OPT slot located on the lower right side of the printer rear
as shown below.
Figure A-16
Network interface card
IB-20
IB-21E
IB-22
Table A-1
This printer remains energized for 30 minutes even after it is powered off due to internal
cooling. Unplug the power cord before installing the network interface card to the
printer. Power on the printer immediately after you finish the network interface card
installation.
IB-20/IB-21E/IB-22 Network Interface Cards
Network connections
10Base-T/100Base-TX/10Base-2
10Base-T/100Base-TX
IEEE802.11b (Wireless)
A-13
OPT Slot