Kyocera Mita FS-C8008DN Operation Manual page 124

7 7 7 7
When the paper type to be customized is displayed, press the ENTER key. Proceed
to the next procedure.
Step 2. Selecting the Paper Weight
1 1 1 1
Complete Step 1. above.
2 2 2 2
Press the key.
3 3 3 3
Press the or
>>Paper Weight
Normal
4 4 4 4
Press the ENTER key. A blinking question mark (?) appears.
>>Paper Weight
? Normal
5 5 5 5
Press the or
Normal (default)
Heavy (Thick)
Extra Heavy
6 6 6 6
When the desired paper thickness is displayed, press the ENTER key. Proceed to the
next procedure.
Step 3. Selecting the Fuser Mode
1 1 1 1
Complete Step 2. above.
2 2 2 2
Press the key.
3 3 3 3
Press the or
>>Fuser Mode
Low
4 4 4 4
Press the ENTER key. A blinking question mark (?) appears.
>>Fuser Mode
? Low
5 5 5 5
Press the or
Low (default)
Middle
key repeatedly until >>Paper Weight appears.
key to display the desired paper thickness from the following:
key repeatedly until >>Fuser Mode appears.
key to display the desired fuser mode from the following:
3-79
3.10 Paper Handling