Carriage-Return (Cr) Action - Kyocera Mita FS-C8008DN Operation Manual

3.7.5

Carriage-Return (CR) Action

This procedure instructs the printer what to do when it receives a carriage-return code
(0DH).
• CR Only: A carriage-return is performed (Default).
• CR and LF: A linefeed and carriage return are performed.
• Ignore CR: The carriage-return is ignored.
1 1 1 1
Press the MENU key.
2 2 2 2
Press the or
Page Set
3 3 3 3
Press the key.
4 4 4 4
Press the or
>CR Action
CR only
5 5 5 5
Press the ENTER key. A blinking question mark (?) appears.
>CR Action
? CR only
6 6 6 6
Press the or
7 7 7 7
When the desired action is displayed, press the ENTER key.
8 8 8 8
Press the MENU key. The display returns to Ready.
key repeatedly until Page Set > appears.
>
key repeatedly until >CR Action appears.
key repeatedly until the desired carriage-return action appears.
3-57
3.7 Pagination