Duplex Printing Error Detection Setting - Kyocera Mita FS-C8008DN Operation Manual

3.13 Other Modes

3.13.10 Duplex Printing Error Detection Setting

If the error detection setting for duplex printing has been turned On, and you attempt to print
onto a paper size and paper type that cannot be used for duplex printing, the Duplex
disabled Press GO error message will be displayed and printing will stop. To print
onto one-side of the paper only when this message is displayed, press the GO key. The
default setting is Off.
1 1 1 1
Press the MENU key.
2 2 2 2
Press the or
Others
3 3 3 3
Press the key.
4 4 4 4
Press the or
>Finishing
Error
5 5 5 5
Press the key and display >>Duplex.
>>Duplex
Off
6 6 6 6
Press the ENTER key. A blinking question mark (?) appears.
>>Duplex
? Off
7 7 7 7
Press the or
>>Duplex
? On
8 8 8 8
Press the ENTER key.
9 9 9 9
To exit the menu selection, press the MENU key.
key repeatedly until Others > appears.
>
key repeatedly until >Finishing Error > appears.
>
key to change Off to On.
3-98