Internal - Kyocera Mita FS-C8008DN Operation Manual

1.2.2

Internal

Caution
Figure 1-3
1 Black Toner Container
This container holds black (K) toner. You must replace the container when the toner
run out.
2 Main Charger Unit
This is an electrical component used to transfer the toner onto the drum unit. The main
charger unit must be cleaned when you replace the toner container.
3 Yellow Toner Container
This container holds yellow (Y) toner. You must replace the container when the toner
run out.
4 Magenta Toner Container
This container holds magenta (M) toner. You must replace the container when the toner
run out.
5 Cyan Toner Container
This container holds cyan (C) toner. You must replace the container when the toner run
out.
6 Power Cord Connector
This connector accepts the power cord supplied with the printer.
In order to maintain operability and print quality, this printer operates a cooling fan for 30
minutes even after the power is turned off. For this reason, you should not unplug the
power cord even after turning off the power.
1-7
1.2 Parts and Functions