Selecting The Option Sorter Mode - Kyocera Mita FS-C8008DN Operation Manual

3.10 Paper Handling

3.10.11 Selecting the Option Sorter Mode

The output stacks change to include the following when an optional bulk stacker
(ST-30) is installed:
Face-down tray
Stacker F-up
Stacker F-down
The output stacks change to include the following when an optional document
finisher (DF-31) is installed:
Face-down tray
Finisher F-up
Finisher F-down
The output stacks change to include the following when an optional sorter (SO-30) is
installed:
Face-down tray
Sorter F-up
Sorter
7 7 7 7
When the desired output stack is displayed, press the ENTER key.
8 8 8 8
To exit the menu selection, press the MENU key.
If you install an option sorter (SO-30), you can have your printouts automatically sorted in
three different ways when printing multiple copies. The three methods are:
• Sorter mode
The sorter receives a complete set of a document starting from the top tray.
• Collator mode
The sorter receives all copies of the same page in each tray starting from the top tray.
• Mailbox mode
The sorter receives all copies of the same page in each tray starting from the bottom
tray.
3-82