3.6 Making Default Settings
Setting the Code Set
You can change the character code set. Available character code sets vary depending on the
current font. (The default is IBM PC-8.)
1 1 1 1
Press the MENU key.
2 2 2 2
Press the
or
Font
3 3 3 3
Press the
key.
4 4 4 4
Press the
or
>Code Set
IBM PC-8
5 5 5 5
Press the ENTER key. A blinking question mark (?) appears.
>Code Set
?IBM PC-8
6 6 6 6
Press the
or
7 7 7 7
Press the ENTER key.
8 8 8 8
Press the MENU key. The display returns to Ready.
key repeatedly until Font > appears.
>
key repeatedly until >Code Set appears.
key until the desired character code set appears.
3-50