Operating Mode Description; Fault Reference Code - MPP Solar PIP 1624 User Manual

Load in Watt

Operating Mode Description

Operation mode
Standby mode / Fault mode
Battery Mode

Fault Reference Code

Fault Code
01 Fan is locked when inverter is off.
02 Over temperature
03 Battery voltage is too high
04 Battery voltage is too low
Output short circuited or over temperature is detected
05
by internal converter components.
06 Output voltage is abnormal.
07 Overload time out
08 Bus voltage is too high
09 Bus soft start failed
Description
No output is supplied by the
unit.
The unit will provide output
power from battery and PV
power.
Fault Event
10
When load is lower than 1kW, load in W will
present xxxW like below chart.
When load is larger than 1kW (≧1KW), load in W
will present x.xkW like below chart.
LCD display
Power from battery.
Icon on