Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for MPP Solar PIP 1624
Summary of Contents for MPP Solar PIP 1624
- Page 1 User Manual PIP 1624 / 2424 2KVA/3KVA Inverter Version: 1.1...
-
Page 2: Table Of Contents
Table Of Contents 1. Introduction ..............................1 Features ................................1 2. Product Overview ............................1 3. Safety Instructions............................2 4. Installation ..............................3 Battery Connection ............................4 AC Output Connection ............................. 5 5. OPERATION ..............................5 Power ON/OFF ..............................5 Operation and Display Panel ........................... -
Page 3: Introduction
1. Introduction This inverter can offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation based on different applications. Features Pure sine wave inverter Isolation design between input and output for safety guarantee ... -
Page 4: Safety Instructions
3. Safety Instructions WARNING: This manual contains important safety and operating instructions. Read this manual carefully before installations and operations, keep it for future reference. Before using the unit, read all instructions and cautionary markings on the unit, the batteries and all appropriate sections of this manual. -
Page 5: Installation
4. Installation NOTE: Before installation, please inspect the unit. Be sure that nothing inside the package is damaged. You should have received the following items inside of package: The unit x 1 User manual x 1 Communication cable x 1 ... -
Page 6: Battery Connection
Battery Connection Before connecting battery wirings, please take off bottom cover by removing two screws as shown below. CAUTION: For safety operation and regulation compliance, it’s requested to install a separate DC over-current protector or disconnect device between battery and inverter. It may not be requested to have a disconnect device in some applications, however, it’s still requested to have over-current protection installed. -
Page 7: Ac Output Connection
connected and ring terminals are tightly screwed to the battery terminals. 4. Fixing the bottom cover on the unit by two screws, refer to the picture in step 1. WARNING: Shock Hazard Installation must be performed with care due to high battery voltage in series. CAUTION!! Do not place anything between the flat part of the inverter terminal and the ring terminal. -
Page 8: Lcd Display Icons
power information. LCD display LED indicators Function keys LED Indicator LED Indicator Messages Green Flashing Output is powered in inverter mode. Solid On Fault occurs in the inverter. Flashing Warning condition occurs in the inverter. Function Keys Function Key Description To exit setting mode To go to previous selection DOWN... - Page 9 Warning: flashing with warning code. Fault: lighting with fault code Output Information Indicate output voltage, output frequency, load percent, load in VA and load in Watt. Battery Information Indicates battery level by 0-24%, 25-49%, 50-74% and 75-100%. Battery capacity be presented as below. Load Percentage Battery Voltage LCD Display...
-
Page 10: Lcd Setting
Indicates the DC/AC inverter circuit is working. Mute Operation Indicates unit alarm is disabled. LCD Setting After pressing and holding ENTER button for 3 seconds, the unit will enter setting mode. Press “UP” or “DOWN” button to select setting programs. And then, press “ENTER” button to confirm the selection or ESC button to exit. -
Page 11: Display Setting
Backlight on Backlight off (default) Backlight control Record enable Record disable (default) Record Fault code Display Setting The LCD display information will be switched in turns by pressing “UP” or “DOWN” key. The selectable information is switched as below order: battery voltage, output voltage, output frequency, load percentage, load in Watt, load in VA. -
Page 12: Operating Mode Description
When load is lower than 1kW, load in W will present xxxW like below chart. Load in Watt When load is larger than 1kW (≧1KW), load in W will present x.xkW like below chart. Operating Mode Description Operation mode Description LCD display No output is supplied by the Standby mode / Fault mode... -
Page 13: Warning Indicator
Warning Indicator Warning Warning Event Audible Alarm Icon flashing Code Fan is locked when Beep three times every inverter is on. second High battery Beep once every second Low battery Beep once every second Overload Beep once every 0.5 second... -
Page 14: Specifications
6. SPECIFICATIONS INVERTER MODEL 2KVA 3KVA Rated Output Power 2KVA/1.6KW 3KVA/2.4KW Pure Sine Wave Output Voltage Waveform 230Vac± 5% Output Voltage Regulation 50Hz Output Frequency Peak Efficiency Overload Protection 5s@≥150% load; 10s@110%~150% load 2* rated power for 5 seconds Surge Capacity Nominal DC Input Voltage 24Vdc Cold Start Voltage... -
Page 15: Trouble Shooting
7. TROUBLE SHOOTING Problem LCD/LED/Buzzer Explanation / Possible cause What to do Unit shuts down LCD/LEDs and buzzer automatically will be active for 3 The battery voltage is too low 1. Charge battery. during startup seconds and then (<1.91V/Cell) 2. Replace battery. process. -
Page 16: Appendix: Approximate Back-Up Time Table
Appendix: Approximate Back-up Time Table Model Load (VA) Backup Time @ 24Vdc 100Ah (min) Backup Time @ 24Vdc 200Ah (min) 1610 1000 2KVA 1200 1400 1600 1800 2000 1100 1200 1500 3KVA 1800 2100 2400 2700 3000 Note: Backup time depends on the quality of the battery, age of battery and type of battery. Specifications of batteries may vary depending on different manufacturers.