Operating Mode Description - MPP Solar PIP 6048MGX-T User Manual

Operating Mode Description

Operating mode
Standby mode / Power
saving mode
Note:
*Standby mode: The inverter
is not turned on yet but at
this time, the inverter can
charge battery without AC
output.
*Power saving mode: If
enabled, the output of
inverter will be off when
connected load is pretty low
or not detected.
Fault mode
Note:
*Fault mode: Errors are
caused by inside circuit error
or external reasons such as
over temperature, output
short circuited and so on.
Behaviors
No output is supplied
by the unit but it still
can charge batteries.
PV energy and utility
can charge batteries.
31
LCD display
Battery is charged by utility.
Battery is charged by PV energy.
Battery is charged by utility and PV energy.
No charging.
Charging by utility and PV energy.
Charging by utility.
Charging by PV energy.
No charging.