Operating Mode Description - MPP Solar PIP-1212MS User Manual

Operating Mode Description

Operation mode
Standby mode / Power
saving mode/ Fault mode
Note:
*Standby mode: The inverter
is not turned on yet but at this
time, the inverter can charge
battery without AC output.
*Power saving mode: If
enabled, the output of inverter
will be off when connected
load is pretty low or not
detected.
*Fault mode: Errors are
caused by inside circuit error
or external reasons such as
over temperature, output
short circuited and so on.
Line Mode
Battery Mode
Description
No output is supplied by the
unit but it still can charge
batteries.
The unit will provide output
power from the mains. It
will also charge the battery
at line mode.
The unit will provide output
power from battery and PV
energy.
LCD display
Charging by utility and PV energy.
Charging by utility.
Charging by PV energy.
No charging.
Charging by utility and PV energy.
Charging by utility.
Charging by PV energy.
Power from battery and PV energy.
Power from battery only.
23