Brickcom CB-100A series User Manual page 68

By increasing the sensitivity, the range of the PIR Sensor is also increased. The PIR Sensor can
be configured to detect movement in the dark up a maximum range of 6 meters. Select from the
drop-down menu to adjust the PIR Sensor's sensitivity.
Notification
(Note - WCB-100Ae does not support this function)
A triggered event using the PIR Sensor can be configured so that when an alarm is activated,
the camera can play an audio clip and flash the LED.
Light LED Mode - to illuminate the scene. The brightness of light source can be manually
selected.
LED Control - The LED on the front of the camera can be set to flash at a configurable interval
(or to not light up at all) when the event is triggered.
Select an Audio file from the drop-down menu to play an audio clip when an alarm is
activated.
Click Apply or Reset to take effect.
NOTE – Please record an audio file at the Audio Clip page first.
- 59 -