Brickcom CB-100A series User Manual page 37

UDP - This protocol allows for more real-time audio and video streams. However, network
packets may be lost due to network burst traffic and images may be broken. Activate UDP
connection when occasions require time-sensitive responses and the video quality is less
important.
 LED Control – Select from the drop-down menu to adjust the brightness of the camera's
LED.
/ Recording on/off - shows the status of recording video
/ MIC on /off - shows the status of MIC volume
/ Speaker on/off - shows the status of Speaker
/ MD on/off - shows the status of Motion Detection

Brightness - Drag the slider bar to adjust the image brightness level.

Mic volume - Drag the slider bar to adjust the Mic volume.

Speaker volume - The built-in speaker plays the sound of an audio clip from computer
MIC when it is enabled.
For more Audio setting, please refer to the Audio configuration on page
Play or Stop - Click this button to play or stop the video.
Recording - Click this button to record video to your computer.
Snapshot - Click this button to capture and save still images.
Digital Zoom - Click this button to enable the zoom operation.
Mirror - horizontally reflect the display of the live video.
- 28 -
35.