Continuous Copying - Kyocera FS-1118MFP Advanced Operation Manual

Continuous Copying

ADVANCED OPERATION GUIDE
4
Press Start. The original is scanned.
Once the scanning operation is completed, Set original and press Start key is
displayed.
5
Place the next original on the Platen ready for scanning and press Start. The next
original is scanned.
6
Repeat step 5 until all the originals have been scanned.
7
When all the originals have been scanned, press right Select. Accepted will appear
and copying commences.
Use Continuous Copying to scan originals into memory in individual sections.The
machine then groups the sections together to form a single job. The copies are then
produced in one batch, as a single job.
Selecting Continuous Copying
1
Press Copy. The basic screen is displayed.
2
Press Function.
3
Press or to select Continuous Scan and press Enter. The Continuous Scan
screen is displayed.
4
Press or to select On and press Enter. The display shows Completed and
returns to the Function screen.
5
Press right Select. The display returns to the basic screen.
Using Continuous Copying
The maximum number of originals to scan depends on the available memory in the
machine. Number of scannable originals (Letter, 5%, Text+Photo mode) are as
follows:
• 96 MB (standard): Approximately 70 sheets
• 128 MB: Approximately 115 sheets
• 192 MB: Approximately 380 sheets
• 320 MB: Approximately 535 sheets
Copying Functions
1-9