Kyocera FS-1118MFP Advanced Operation Manual page 125

ADVANCED OPERATION GUIDE
Paper Size
Cassettes and an MP tray are available for the paper sizes listed in the table below.
The dimensional tolerances are ±0.7 mm (±0.0276 inches) for the length and width.
The angle at the corners must be 90° ±0.2°.
Paper Feed
Source
Cassette or MP
Tray
MP Tray only
Smoothness
The paper should have a smooth, uncoated surface. Paper with a rough or sandy
surface can cause voids in the printed output. Paper that is too smooth, however, can
cause multiple feeding and fogging problems. (Fogging is a gray background effect.)
Paper Size Dimensions
Letter 8 1/2 × 11 inches
Legal 8 1/2 × 14 inches
ISO A4 210 × 297 mm
ISO A5 148 × 210 mm
JIS B5 182 × 257 mm
Folio 210 × 330 mm
Oficio II 8 1/2 × 13 inches
Executive 7 1/4 × 10 1/2 inches
ISO B5 176 × 250 mm
16K 197 × 273 mm
Statement 5 1/2 × 8 1/2 inches
ISO A6 105 × 148 mm
JIS B6 128 × 182 mm
Envelope #10 4 1/8 × 9 1/2 inches
Envelope #9 3 7/8 × 8 7/8 inches
Envelope 3 7/8 × 7 1/2 inches
Monarch
Envelope #6 3 5/8 × 6 1/2 inches
Envelope DL 110 × 220 mm
Envelope C5 162 × 229 mm
Hagaki 100 × 148 mm
OufukuHagaki 148 × 200 mm
Youkei 2 114 × 162 mm
Youkei 4 105 × 235 mm
Custom 80 to 216 mm × 148 to 356 mm (3.15 to
8.50 inches × 5.83 to 14.02 inches)
Appendix-3