Setting The Emulation Mode - Kyocera FS-1118MFP Advanced Operation Manual

Printer Settings

Setting the Emulation Mode

System Menu/
Counter
or
Printer Setting
Enter
or
Emulation
Enter
3-6
Available emulations are: Line Printer, IBM Proprinter, DIABLO 630, EPSON LQ-
850, PCL6, KPDL, and KPDL (AUTO).
If KPDL (AUTO) emulation is selected, the machine will automatically switch from
KPDL to a alternative emulation mode in accordance with the data to be printed. If
KPDL emulation is selected, you can select whether or not to have a report printed
out automatically whenever a KPDL error occurs during printing.
1
Access Emulation.
If you are unsure how to use this route map refer to Accessing Menu Items on
page vii.
2
Press or to select the required emulation mode.
If you selected Line Printer, IBM Proprinter, DIABLO 630, EPSON LQ-850, or
PCL6, the display shows Completed and returns to the Printer Setting screen.
If you selected KPDL, the KPDL Err Rep screen is displayed. Select whether
or not a report is to be printed out upon a KPDL error.
3
Press or to select either On or Off and press Enter. The display shows
Completed and returns to the Printer Setting screen.
If you selected KPDL(AUTO), the Alt. Emulation screen is displayed.
The asterisk (*) indicates the currently selected alternative emulation mode.
4
Press or to select the alternative mode, and press Enter. The KPDL Err
Rep screen is displayed.
5
Select whether or not a report is to be printed out upon a KPDL error, and
press Enter. The display shows Completed and returns to the Printer Setting
screen.
ADVANCED OPERATION GUIDE