Kyocera FS-1118MFP Advanced Operation Manual page 57

Item Available
Settings
Volume 0 Off
1 Minimum
2
3 Middle
4
5 Maximum
Key Conf. Buzzer Off
On
Key Fail Buzzer Off
On
Reset Buzzer Off
On
Job End Buzzer Off
On
Ready Buzzer Off
On
Warning Buzzer Off
On
ADVANCED OPERATION GUIDE
Adjusting Alarms
The following shows the various alarms and the available volume settings.
Description
Adjust the volume of the alarms. To make all alarm sounds inaudible,
select the Off setting. The larger the setting value, the larger the
volume.
Indicates that the machine has accepted the key operation that was
performed by the user.
Indicates that for some reason the machine is unable to accept the key
operation that was performed by the user.
Indicates that Reset/Power was pressed in order to reset the current
settings.
Indicates that a corresponding copy, print, or send job was completed
or that the machine has returned to an operation-ready state.
Indicates that the machine is in an operation-ready state.
Indicates that in its current state the machine is unable to perform the
corresponding job.
This setting applies when one of the following messages appears on
the display.
Close Document Processor.
Insert Cassette 1.
KPDL error. Job is ended.
Load Paper in Cassette1 (Cassette2, MP Tray, or Document
Processor).
Memory overflow. Part of the job end is printed.
Place original and press Start key.
Print overrun. This page isn't complete.
Remove original from Document Processor.
Send error.
Toner low.
System Settings
5-9