Low Power Timer - Kyocera FS-1118MFP Advanced Operation Manual

System Menu/
Counter
or
Date/Timer Set
Enter
or
Reset Timer
Enter
System Menu/
Counter
or
Date/Timer Set
Enter
or

Low Power Timer

Enter
ADVANCED OPERATION GUIDE
Reset Timer
1
Access Reset Timer.
If you are unsure how to use this route map refer to Accessing Menu Items on
page vii.
2
Press or
is displayed.
3
Press or
Press Enter. The display shows Completed and returns to the Date/Timer Set
screen.
Low Power Timer
The machine has a Low Power Timer that is used to conserve power when it is not
operating. You can adjust this time to between 1 minute and 240 minutes before the
machine enters low power mode. The factory default time is 5 minutes.
The machine wakes from low power mode whenever any one of the keys on the
operation panel is pressed, an original is placed in the document processor, the
cassettes or MP tray are opened or closed, or a print job is received.
1
Access Low Power Timer.
If you are unsure how to use this route map refer to Accessing Menu Items on
page vii.
2
Press or
Timer to engage and press Enter. The display shows Completed and returns
to the Date/Timer Set screen.
Auto Sleep Timer
The machine has an Auto Sleep Timer that is used to conserve power when it is not
operating. You can adjust this time to between 1 minute and 240 minutes before the
machine enters sleep mode. The factory default time is 30 minutes.
To engage auto sleep manually, press and hold Reset/Power for at least three
seconds. Auto sleep will engage immediately. The machine wakes from auto sleep
whenever you press Reset/Power.
to select Reset Timer and press Enter. The Reset Timer screen
or use the numeric keys to register the current Reset Timer.
or use the numeric keys to select the time for the Low Power
System Settings
5-13