Start Page - Kyocera FS-1118MFP Advanced Operation Manual

Using COMMAND CENTER
Page Description
Fax page This page includes settings that apply to the FAX function of the device, such as FAX
transmit and receive settings.
Jobs page This page includes information on all device jobs including job status, scheduled job and
job log.
Advanced This page includes advanced settings that apply to the entire machine and is comprised
page primarily of advanced network settings.

Start Page

Item
Select Language
Operation Panel
Toner Level
General Information
Media Input
8-4
The following operations are possible from the Start page.
• Verifying the machine's operating status
• Changing the language that COMMAND CENTER is displayed in
• Verifying various settings (machine, printing, scanning, network and e-mail)
• Verifying the number of scanned pages and the number of prints made on the
machine
• Access linked home pages
All users will have access to the Start page.
To return from any other page to this home page, click on
Start > Start
This page allows you to verify the machine's operating status. This will be the first
screen that appears after COMMAND CENTER has been started up.
Description
Appears if COMMAND CENTER pages support multiple languages. Supported
languages may also be selected through language preference settings in your
browser.
To change COMMAND CENTER language:
- Open the Select Language drop down list by clicking it.
- Select the appropriate language.
If you attempt to view COMMAND CENTER with a character set other than the
language that is used on the operation panel's display, some characters may be
illegible.
This indicates the machine's operating status as displayed on the operation
panel. To update the display to the most recent status, click the Refresh button.
This shows the approximate level of remaining toner. When the value is 100%,
the toner container is full. The closer to 0%, the smaller the amount of remaining
toner.
This allows you to verify the following information: IP Address, Host Name, MAC
Address, System Firmware, Engine Firmware, Serial Number, and Asset
Number.
This shows paper size and media type for cassettes and MP tray.
Start.
ADVANCED OPERATION GUIDE