Continuous Scanning - Kyocera FS-1118MFP Advanced Operation Manual

Continuous Scanning

ADVANCED OPERATION GUIDE
Using the Document Processor
Top Edge to Rear
Rear
Use Continuous Scan to scan originals into memory in individual sections. The
machine groups the sections to form a single job.
1
Press Send. The basic screen is displayed.
2
Press Function.
3
Press or to select Continuous Scan and press Enter. The Continuous Scan
screen is displayed.
4
Press or to select On and press Enter. The display shows Completed and
returns to the Function screen.
5
Press right Select. The display returns to the basic screen.
Using Continuous Scanning
1
Place the first original on the platen.
2
Press Send. The basic screen is displayed.
3
Enter the destination of the intended recipient from the one-touch keys, Address
Book or .
To register one-touch keys refer to Registering One-Touch Keys on page 5-6. To use
the address book refer to Using the Address Book on page 2-4.
4
Program the features as required.
5
Press Start. The first original is scanned.
6
Once the scanning operation is completed, Set original and press Start key is
displayed. Place the next original on the platen and press Start. The next original is
scanned.
7
Repeat step 6 until all originals have been scanned.
Top Edge to Left
Left
Scanning Functions
2-9