Commissioning - Waldorf GP8910GE Installation And Operation Manual

Commissioning

Before leaving the new installation;
Check the following functions in accordance with the operating instructions specified in the
'Operation' section of this manual.
• Light the Griddle Pilot Burner.
• Light the Griddle Main Burner.
• Check the Griddle Low Fire Operation.
• Check the Oven Heating.
• Check the Oven Thermostat Operation.
• Check the Oven Fan Operation (GP8910GEC and GP8121GEC Ovens Only).
Ensure that the operator has been instructed in the areas of correct lighting, operation, and
shutdown procedure for the appliance.
This manual must be kept by the owner for future reference, and a record of the
of Installation Serial Number of the Appliance
and
details can be found on the Rating Plate attached to the bottom right hand corner of the
bottom sill. Refer to the 'Installation' section).
NOTE: If for some reason it is not possible to get the appliance to operate correctly, shut off the
gas supply and contact the supplier of this appliance.
recorded and kept with this manual. (These
11
Installation
Date of Purchase, Date