Advanced - Management - Snmp - Snmpv1/V2C - Kyocera COMMAND CENTER Multifunctional Printer Operation Manual

COMMAND CENTER Pages
Advanced > Management > SNMP > SNMPv1/v2c
42
Item
POP3 Server
Timeout
Login User
Name
Login
Password
Use APOP
Test
Delete e-mail
after retrieval
E-mail size limit
Cover Page
The SNMP protocol is used for providing and transferring management information
within the network environment. Should an error occur such as Add Paper, the printing
system automatically generates a trap, an error message sent to up to two pre-
determined trap recipients.
Item
SNMPv1/v2c
Read
Community
Write
Community
sysContact
Description
Enter the timeout in seconds during which this machine tries
to connect to the POP3 server.
Enter the login name of the user.
Enter the password for connecting to the user name above.
Enables or disables APOP.
This will test one transmission for each press.
Enables or disables the Delete E-mail after retrieval function.
Enter maximum E-mail size in Kilobytes. When the value is 0,
the limitation for E-mail size is disabled.
Specifies whether to print the body of E-mail in addition to the
attached files.
When this item is set to On, the attached files and the body
of E-mail are printed.
When no attached files exist, only the body of E-mail is printed.
When this item is set to Off, only the attached files are printed.
When no attached files exist, nothing is printed.
Description
Sets whether to use the SNMPv1/v2c protocol. Set On to use
it. After you have changed this setting, you must restart this
machine.
The read community can be used like a password. The
default read community name is public. After you have
changed this setting, you must restart this machine. When a
management application sends an SNMP request to read a
value, it must include the correct read community name or
the request will be rejected by the printing system.
Similar in function to the read community, but used in SNMP
requests to write (change) a value.The default write
community name is public. After you have changed this
setting, you must restart this machine.
The MIB-II sysContact object, usually the E-mail address of
the network administrator.
KYOCERA COMMAND CENTER