Fax / I-Fax - I-Fax - Pop3 - Kyocera COMMAND CENTER Multifunctional Printer Operation Manual

FAX / i-FAX > i-FAX > POP3
Operation Guide
The table below provides a summary of the items displayed on the POP3 page.
Item
POP3
Auto Receive
Check Interval
Run once now
E-mail Address
POP3 Server
Name
POP3 Port
Number
POP3 Server
Timeout
Login User Name
Login Password
Use APOP
Test
Delete e-mail
after retrieval
E-mail Size Limit
Description
Enables or disables POP3.
For how to change this setting, refer to Advanced > E-mail >
POP3 > General on page 41.
Specifies whether to print received i-FAX messages
automatically. When this item is set to On, the system
checks the POP3 server for received messages at the
intervals set in Check Interval descried below and
immediately prints the messages if any. When this item is set
to Off, the periodic checks are not executed. Click Receive
described below to check for messages.
Displays the interval, in minutes, for connecting to the POP3
server to check for incoming mails. For how to change this
setting, refer to Advanced > E-mail > POP3 > General on
page 41.
Click the Receive button to immediately receive E-mail from
the POP3 server.
Enter the E-mail address for i-FAX . The E-mail address is
displayed in Sender Address on FAX / i-FAX > i-FAX >
SMTP on page 28.
Enter the POP3 server name or IP address.
Enter the POP3 port number or use the default port number
110.
Enter the timeout in seconds during which this machine tries
to connect to the POP3 server.
Enter the login name of the user.
Enter the password for connecting to the user name above.
Enables or disables APOP.
Tests to confirm that the settings on this page are correct.
When the Test button is pressed, this machine tries to
connect to the POP3 server.
Enables or disables the Delete E-mail after retrieval function.
Enter maximum E-mail size in Kilobytes. When the value is
0, the limitation for E-mail size is disabled.
COMMAND CENTER Pages
29