Advanced - Protocols - Netware - Kyocera COMMAND CENTER Multifunctional Printer Operation Manual

Advanced > Protocols > Netware
Operation Guide
Item
Start of Job
String
End of Job
String
This printing system supports both NDS and bindery printing in either print server mode
or remote printer mode.
NetWare setup requires installation of the following client software and logon with
Administrator Privileges. If you are unsure, please contact your network administrator.
With Novell Client, creation of the NetWare print objects with the AdminManager
NetWare Setup Wizard requires the NetWare Client from Novell. For NetWare printing,
you may use the NetWare Client from either Novell or Microsoft.
For Admin Privileges, network operations (creating queues etc.) require 'admin' or
'supervisor' privileges (or equivalent). Certain portions of AdminManager may be
inoperable if you attempt those operations without sufficient privileges.
Item
NetWare
Protocol
Bindery Mode
Frame Type
File Server
(Primary)
NDS Tree
NDS Context
Print Server
Mode
Print Server
Name
Queue Polling
Interval
Password
(optional)
Description
Specifies the character string sent to the printer before
output directly to the output port (lp port). Specifies the
character string if it is necessary to transmit the control code
before printing.
Specifies the character string sent to the printer after directly
outputting to the output port (lp port). Specify a character
string, if it is necessary, to send a control code after printing.
Description
Enables or disables the Network Protocol.
Enables or disables Bindery Mode.
Sets the Frame type. You can choose from Auto, 802.3,
Ethernet-II, SNAP or 802.2.
Enter the name of the primary File Server.
Enter the name of the NDS Tree.
Enter the NDS Context.
Enables or disables Print Server Mode.
Enter the Print Server Name.
Enter the Queue Polling Interval in seconds.
Enter the Password, if required. Login to NetWare will be
successful only if the password set here matches the Print
Server password set within the NetWare utilities.
COMMAND CENTER Pages
37