Advanced - Protocols - Ipp; Advanced - Protocols - Appletalk - Kyocera COMMAND CENTER Multifunctional Printer Operation Manual

COMMAND CENTER Pages
Advanced > Protocols > IPP
Advanced > Protocols > AppleTalk
38
Item
Remote Printer
Mode
Print Server
Name
Job Timeout
Using IPP (Internet Printing Protocol) or IPP over SSL, you can output to the printing
system over the Internet or an intranet.
Item
IPP
IPP Port
Number
IPP over SSL
IPP over SSL
Port Number
You can print from Macintosh computers using the AppleTalk protocol.
The printing system network component supports Mac OS of various versions (System
Requirements on page 1) and is compatible with LaserWriter driver version 8.x.
To set up the Ethernet interface to communicate via AppleTalk, enables AppleTalk
protocol operation on the printing system.
Item
AppleTalk
Printer Name
Zone Name
Description
Enables or disables Remote Printer Mode.
Enter the name of the printer server that the remote printer
belongs to.
Enter the timeout in seconds.
Description
Enables or disables IPP.
Sets the port number to be used by IPP. In normal situations,
set this port number to 631.
Enables or disables the IPP over SSL protocol.
Sets the port number to be used by IPP over SSL. In normal
situations, set this port number to 443.
Description
Enables or disables AppleTalk protocol.
Specifies the name of the printing system in the AppleTalk
network.
Specifies the name of the AppleTalk zone (network). An
asterisk (*) means the default zone.
KYOCERA COMMAND CENTER