Printer - Summary Of Network Printer Access Methods; Printer - System - Kyocera COMMAND CENTER Multifunctional Printer Operation Manual

COMMAND CENTER Pages
Printer > Summary of Network Printer Access Methods
Printer > System
16
Default printer settings will be overridden by the printer driver settings. Settings that
affect the machine entirely, such as locking the operation panel, are found under Basic
Page on page 7.
The following information that has already been set is displayed here.
- IP Address
- Host Name
- Net BEUI Name
- Apple Talk Name
The table below provides a summary of the items displayed on the System page.
Item
Form Feed
Timeout
Emulation
Alternate
Emulation
*1
Duplex Mode
Copies
Page Orientation
*2
Tone
*2*4
Gloss Mode
*2
Color Mode
*3
KIR Mode
*3
EcoPrint Mode
*3
Resolution
*1 : Available on machines with the duplex printing.
*2 : Available for some color machines.
*3 : Available for monochrome machines and some color machines.
*4 : Available on machines which support Gloss Mode.
Description
Adjusts the timeout between 5 and 495 seconds, after which
a form feed will occur in the absence of data. The default
setting is 30 seconds.
Selects an emulation mode.
Specifies which emulation mode should be used for
processing at the time data other than KPDL is received,
when AUTO is selected for emulation.
Selects the default duplex mode from Off, Long Edge and
Short Edge.
Sets the number of copies to print.
Switches Portrait or Landscape page orientation.
Sets Tone mode to Normal or Fine. The default setting is
Normal.
Sets Gloss Mode to High or Low. The default setting is
Low.
Sets Color Mode to Monochrome or Color.
Switches KIR (Kyocera Image Refinement) smoothing On
or Off.
Switches EcoPrint On or Off to control toner consumption
for saving the printing costs. The default setting is Off.
Changes the printing resolution.
KYOCERA COMMAND CENTER