Table of Contents
Advertisement
2.
Search for desired recording by entering search parameters. Search parameters include Camera #,
Video/File Type, and Start/End Time.
3.
Click the Search button. A list of recordings (similar to Figure 7), matching the search parameters will
be displayed.
4.
Select the file you would like to lock/unlock.
5.
Click on the Lock button to lock file. If the file is already locked, click on the Unlock button to unlock
file. Locked files will be shown with a closed lock while unlocked files with an opened lock.
6.
Click Cancel to exit out of the Video Search menu.
Figure 7. Video Search Result List
alarm shop
Setting HDD to Read‐Only
To set a HDD to read-only:
1.
Navigate to the HDD Management menu by going to Menu > HDD Management. The HDD
Management menu is shown in Figure 8.
Figure 8. HDD Management Menu
2.
Select the General tab.
3.
Select the HDD to set to read-only.
4.
Click the Property button. This will take you to the Property Settings menu, shown in Figure 9.
33
Advertisement
Table of Contents
