Table of Contents
Advertisement
Hard Disk Drive (HDD).
4.
Status Indicators: Status indicators for different features of the DVR.
•
Ready: The indicator lights in blue when DVR is functioning properl
•
Status: The indicator lights in blue when DVR is controlled by an IR rem
when controlled by a keyboard and purple when IR remote and keyboard is used at the same time.
•
Alarm: Alarm indicator turns red when a sensor alarm is detected.
•
Record: Indicating the working status of the device. The indicator w
DVR is under recording.
•
Network: The indictor will
5.
Alphanumeric Buttons: Alphanumeric buttons used in various menus of the DVR.
•
Switching to the corresponding channel in Preview or PTZ Control mode.
•
Inputting numbers and characters in Edit mode.
•
Switching between different channels in Playbac
6.
Compound Buttons:
•
1 MENU: (1) Enter n
•
2ABC/F1: (1) Enter numeral "2"; (2) Enter letters "ABC"; (3) The F
field will select all items on the list. In PTZ Control mode, it will turn on/off PTZ light.
•
3DEF/F2: (1) Enter numeral "3"; (2) Enter letters "DEF"; (3) The F2 button is used to cycle
through tab pages. It will also bring up the Channel & OSD Position settings.
•
4GHI/ESC: (1) Enter numeral "4"; (2) Enter letters "GHI"; (3) Exit and back to the previous menu
•
5JKL/EDIT: (1) Enter numeral "5"; (2) Enter letters "JKL"; (3) Delete characters before cursor;
(4)Select the checkbox and ON/OFF switch; (5) Start/stop record clipping in playback
•
6MNO/PLAY: (1) Enter numeral "6"; (2) Enter letters "MNO"; (3) Playback, for direct access to
playback interface
•
7PQRS/REC: (1) Enter numeral "7"; (2) Enter letters "PQRS"; (3) Manual record, for direct access
to manual record interface; manually enable/disable record
•
8TUV/PTZ: (1) Enter numeral "8"; (2) Enter letters "TUV"; (3) Access PTZ control interface
•
9WXYZ/PREV: (1) Enter numeral "9"; (2) Enter letters "WXYZ"; (3) Multi-camera displa
alarm shop
preview
•
0/A: (1) Enter numeral "0"; (2) switch between input methods (upper and lowercase alphabet,
symbols and numeric input)
7.
Control Buttons:
•
Directional butto
fields and items and select setting parameters. In playback mode, the Up and Down buttons are use
to speed up and slow down record play, and the Left and Right buttons are used to select the
recording 30s forwards or backwards. In preview mode, these buttons can be used to cycle th
channels.
•
Enter: The En
fields and ON/OFF switch. In playback mode, it can be used to play or pause the video. In
single-frame play mode, pressing the Enter button will advance the video by a single frame.
auto sequence preview mode, the buttons can be used to pause / resume auto sequence.
8.
JOG SHUTTLE Control: The JOG SHUTTLE control can be used to move the active se
menu. The inner ring will move the selection up and down; the inner ring will move it left and right.
In the Playback mode, the inner ring is used to jump 30 seconds forward/backward in a video. The
inner ring can be used to speed up/slow down the video. In Preview mode, it can be used to cycle
through different channels.
Using the IR Remote Control
Your DVR may also be controlled with the included IR remote control, shown in Figure 4.
Batteries (2×AAA) must be installed before operating.
flicker in green when network connection is functioning normally.
umeral "1"; (2) Access the main menu interface
ns: In menu mode, the direction buttons are used to navigate between different
ter button is used to confirm selection in menu mode; or used to select checkbox
10
y.
ote. Indicator turns red
ill light in green when the
k mode.
1 button when used in a list
y in
d
rough
And in
lection in a
Advertisement
Table of Contents
