Table of Contents
Advertisement
alarm shop
Figure 4. IR Remote Control
The keys on the remote control closely resemble the ones found on the front panel. Referring to Figure 5, they include:
1.
POWER: Turn on/off DVR.
2.
DEV: Enable/Disable Remote Control.
3.
Alphanumeric: Same as Alphanumeric buttons on front panel.
4.
EDIT: Same as JKL/EDIT button on front panel.
5.
A: Same as 0/A button on front panel.
6.
REC: Same as 7PQRS/REC button on front panel.
7.
PLAY: Same as 6MNO/PLAY button on front panel.
8.
INFO: Reserved.
9.
VOIP: Same as 3DEF/F2 button on front panel.
10. MENU: Same as 1/MENU button on front panel.
11. PREV: Same as 9WXYZ/PREV button on front panel.
12. DIRECTION/ENTER Buttons: Same as DIRECTION/ENTER buttons on front panel.
13. PTZ: Same as 8TUV/PTZ button on front panel.
14. ESC: Same as ESC button on front panel.
15. RESERVED: Reserved.
16. F1: Same as 2ABC/F1 button on front panel.
17. PTZ CONTROL Buttons: Buttons to adjust the iris, focus and zoom of a PTZ camera.
18. F2 Button: The F2 button is used to cycle through tab pages. It can also be used to enter the Channel
&OSD Position settings.
Aim the remote control at the IR receiver located at the front of the unit to test operation. If there is no response:
1.
Using the front control panel or the mouse, go into Menu > Settings > General > More Settings.
2.
Check and remember DVR ID#. The default ID# is 255. This ID# is valid for all IR controls.
3.
Press the DEV button on the remote.
4.
Enter the DVR ID# from step 2.
5.
Press the ENTER button on the remote.
11
Advertisement
Table of Contents
