Setting Hdd Property To Read-Only - HIKVISION Network Video Recorder User Manual

User Manual of Network Video Recorder
5. Protect the record files.
1) Find the record files you want to protect, and then click the
that the file is locked.
The record files of which the recording is still not completed cannot be locked.
2) Click to change it to

5.8.2 Setting HDD Property to Read-only

Steps:
1. Enter HDD setting interface.
Menu> HDD
2. Click to edit the HDD you want to protect.
To edit HDD property, you need to set the storage mode of the HDD to Group. See Chapter Managing
HDD Group.
3. Set the HDD property to Read-only.
4. Click OK to save settings and back to the upper level menu.
to unlock the file and the file is not protected.
Figure 5. 33 Unlocking Attention
Figure 5. 34 HDD General
Figure 5. 35 HDD General- Editing
88
icon which will turn to , indicating