Table of Contents
Advertisement
Figure 2. Advanced Camera Settings Menu
4.
Check the Mask checkbox to enable feature.
5.
Click the Area Settings button to enter Area Settings menu.
6.
Set mask area, as shown in Figure 3. Up to 4 areas can be set.
alarm shop
Figure 3. Setting Mask Area
7.
Select OK to save and exit mask setup.
Adjusting Display Settings
Display settings such as the brightness, contrast, saturation and hue can also be adjusted in the Camera Management
menu.
To adjust display settings:
1.
Enter the Camera Settings menu by clicking Menu > Setting > Camera.
2.
Select the Advanced tab to enter the Advanced Camera Settings menu, shown in Figure 2.
3.
Select channel to adjust display settings under Channel #.
4.
Click the Set button next to the Image Settings label.
75
Advertisement
Table of Contents
