Table of Contents
Advertisement
Figure 6. DDNS Settings Menu
4.
Check the DDNS checkbox to enable feature.
5.
Select DDN
DynDNS.
•
IpServer: Enter Server Address for IpServer.
•
PeanutHull
(Figure 6).
•
DynDNS: Enter Server Address for DynDNS (i.e. members.dyndns.org) (Figure 7). Under
DVR Domain Name, enter the domain name obtained from the DynDNS web site. Lastly, ente
the User N
settings.
alarm shop
Figure 7. DynDNS Settings
Configuring an NTP Server
A Network
Time Protocol (NTP) Server may also be setup on your DVR to keep the date and time current and
accurate.
To setup an NTP server:
1.
Enter the Network Settings menu b
2.
Select the Advanced tab.
3.
S
elect the Set button next to NTP to enter the NTP settings menu, as shown in Figure 8.
S Type. There are three different DDNS type to choose from, IpServer, PeanutHull and
: Enter DVR Domain Name and Password obtained from the PeanutHull website
ame and Password registered in the DynDNS network. Then click OK to save the
y clicking Menu > Setting > Network.
62
r
Advertisement
Table of Contents
