Table of Contents
Advertisement
4.
Click the Set button next to PPPoE to enter PPPoE settings menu, shown in Figure 5.
Figure 5. PPPoE Settings
5.
Check the PPPoE checkbox to enable feature.
6.
Enter User Name, Password, and Confirm Password for PPPoE access. PPPoE credentials can be
obtained from your network administrator.
dial-up into your network after rebooting.
alarm shop
7.
Click OK button to save and exit Network Settings menu. You may now restart your DVR for settings
to take place. To check on the st
select the Network Status tab.
Configuring DDNS
If your DVR is se
tup to use PPPoE as its default network connection, you may setup Dynamic DNS (DDNS) to be used
in
conjunction.
T
o setup DDNS:
1.
Enter the Network Settings menu by
2.
Select the Advanced tab.
3.
Select the Set button next to DDNS to enter the DDNS settings menu, shown in Figure 6.
Once the setup is completed, your DVR will automatically
atus of your PPPoE connection, go to Menu > Setting > Network and
clicking Menu > Setting > Network.
61
Advertisement
Table of Contents
