Offline State - Tally Dascom 1225 User Manual

Tally Dascom 1225

Offline State

Switch
Function Name
Operation
Font {S1}
Pitch {S2}
LF {S3}
FF [S3]
Load/Eject {S4}
Online {S5}
Micro Forward {S4}+[S5]
Micro Reverse {S3}+[S5]
Activate [S2]+{S3}
user-defined
sensitivity
LED
L1~L4 Selects the font.
L5~L8 Selects the pitch.
- Feeds a line with every press of S3.
By holding S3, the printer initially feeds a few lines; then feeds
- the form to the next TOF for rear tractor or ejects the form for
cut sheets.
 Load: Automatically loads the paper (according to path
selection) when no paper is on the platen.
 Eject: For rear tractor, it retracts the form from the platen to
-
allow users to install cut sheets. (NOTE: Users have to toggle
the path selection lever.)
For cut sheets, it ejects the form on the platen.
L10 Toggles between Online and Offline states
- While holding down S5, press S4 to micro feed paper up.
- While holding down S5, press S3 to micro feed paper down.
Activates the calibrated PE sensor sensitivity value according
to the currently selected paper path. Beeps once when
completed.
17
Function Description