Table of Contents
Advertisement
Tally Dascom 1225
3 Paper Installation Guide
The printer can handle either single sheets or continuous forms. Single sheets, also called cut sheets, include
envelopes and non-continuous, multipart forms. Continuous forms include labels and multipart forms fed into
the printer using the forms tractors. The printer is able to print 1~5 plies multipart paper.
Do not load paper that has been folded or is damaged, wrinkled, or curled.
Adjusting the Print Gap Lever
The print gap lever is on the left side of the printer. Take care to adjust the print gap lever to a suitable position
whenever you change the number of copies being printed. Using the wrong print gap may cause print head
damage or paper jams.
Paper type
Single sheet
2-ply
3-ply
4-ply
5-ply
Change ribbon
There are 2 paper feed modes: friction feed and tractor feed.
Friction Feed Handling
1. Move the paper-feed lever forward to "
2. Adjust the print gap lever if necessary.
2
Weight (g/m
) / ply
52～100
40～52
40～52
40～52
40～52
---
" for friction feed mode.
Thickness (mm)
0.06～0.12
0.12～0.14
0.17～0.22
0.23～0.27
0.28～0.33
Above 0.45
10
Gap lever position
1P～2P
3P～4P
5P
Advertisement
Table of Contents
Need help?
Do you have a question about the 1225 and is the answer not in the manual?
Questions and answers