Power-On State - Tally Dascom 1225 User Manual

Tally Dascom 1225

Power-On State

Function Switch
Name Operation
Menu Setup /
EDS
Hex Dump
Self Test /
Status Page
Service Menu [S2]+[S3]
Adjust Page [S4]+[S5]
Margins
LED
[S2] - Allows for Main Menu setting changes. Please read the
instructions printed on how to change settings when this
mode is activated. (EDS: Electronic DIP Switch)
[S4] - Beeps once to indicate going into hex dump mode:
 Prints data from host in hexadecimal representation.
 Pressing S4 suspends the printing.
 When the hex dump has finished, pressing S4 forces the
 Pressing S1 can change the font.
 Switch off the power to terminate the hex dump.
[S5] - Prints the printer settings and self-test pattern.
Pressing S1 can change the font.
- Vertical Alignment, Change Pin Function and Endless Self
Test
- Includes Adjust Fanfold Top Margin, Adjust Single Top
Margin, Adjust Fanfold Left Margin, Adjust Single Left
Margin and Adjust Tear-Off position.
Function Description
printing of the last line of data, as any line termination
control code from host has no function.
19