Interface Setup; Advanced Setup - Tally Dascom 1225 User Manual

Tally Dascom 1225
Auto Tear

Interface Setup

Interface
Valid Settings
Setup
Interface Auto, Parallel, USB
RAM Usage User Font, Buffer
I-PRIME Yes, No
Auto IF
10s, 30s
Delay

Advanced Setup

Advanced Setup
Auto Load
Paper Jam
Prevention
Paper End Detect
Form Length Ctrl
Pitch Ctrl
Font Ctrl
Quality Ctrl
Buzzer
Manual, 0.5s, 1s, 2s, 3s, 4s, 5s
For multi-host connection. Auto: First come first served;
Parallel/USB: Serves the designated host only.
User Font: Part of RAM is used for user download characters;
Buffer: Disables user character download function; uses RAM for
expanded buffer size up to 48KB.
Yes: Host I-Prime signal resets the printer.
Determines the waiting time before receiving data from another
interface.
Valid Settings
Manual, 0.5s, 1s, 1.5s, 2s
Yes, No
Yes, No
Software, Ignore
Software, Ignore
Software, Ignore
Software, Ignore
Yes, No
Specifies the waiting time before feeding the
page to tear-off position automatically. Manual:
Auto tear mode is off. (Applies to tractor mode
only)
Function
Specifies the waiting time before loading a cut
sheet automatically. Manual: Auto load mode is
off. (Applies to friction mode only)
Flattens paper edges by carriage movement
before printing starts.
Yes: Detects paper out and halts printing;
otherwise, ignores paper out and continues
printing.
Ignore: Ignores form length commands
Ignore: Ignores CPI commands
Ignore: Ignores font select commands
Ignore: Ignores print quality commands
Yes: Sounds buzzer on all hardware errors
24
Function