Table of Contents
Advertisement
3
BIOS Setup
Save & Exit Setup
When all the changes have been made, highlight "Save & Exit Setup"
and press <Enter>. The message below will appear:
Type "Y" and press <Enter>. The modifications you have made will
be written into the CMOS memory, and the system will reboot. You
will once again see the initial diagnostics on the screen. If you wish to
make additional changes to the setup, press <Ctrl> <Alt> <Esc>
simultaneously or <Del> after memory testing is done.
Exit Without Saving
When you do not want to save the changes you have made,
highlight "Exit Without Saving" and press <Enter>. The message
below will appear:
Type "Y" and press <Enter>. The system will reboot and you will
once again see the initial diagnostics on the screen. If you wish to
make any changes to the setup, press <Ctrl> <Alt> <Esc>
simultaneously or <Del> after memory testing is done.
78
Save to CMOS and Exit (Y/N)? N
Quit Without Saving (Y/N)? N
Advertisement
Table of Contents
