Table of Contents
Advertisement
2
Hardware Installation
Power Connector
2 0
1 1
1 0
1
Use a power supply that complies with the ATX12V Power Supply
Design Guide Version 1.1. An ATX12V power supply has a standard
20-pin ATX main power connector that must be inserted onto the
PL1 connector.
The system board requires a minimum of 180 Watt power supply
to operate. Your system configuration (amount of memory, add-in
cards, peripherals, etc.) may exceed the minimum power requirement.
To ensure that adequate power is provided, use a 300 Watt (or
greater) power supply.
43
Advertisement
Table of Contents
