Table of Contents
Advertisement
Chapter 4 - Supported Software
Drivers, Utilities and Software Applications
VIA Hardware Monitor
The system board comes with the VIA Hardware Monitor utility
contained in the provided CD. It is capable of monitoring the
system's hardware conditions such as the temperature of the CPU
and system, voltage, and speed of the CPU and chassis fans. It also
allows you to manually set a range to the items being monitored. If
the values are over or under the set range, a warning message will
pop-up. The utility can also be configured so that a beeping alarm
will sound whenever an error occurs. We recommend that you use
the "Default Setting" which is the ideal setting that would keep the
system in good working condition.
Note:
Use this utility only in Windows
98 SE, Windows
operating system.
To install the utility, insert the CD into a CD-ROM drive. The autorun
screen (Main Board Utility CD) will appear. Click the "VIA Hardware
Monitor" button to install the utility. Refer to its "readme" file for
instructions on using the utility.
VIA Service Pack
The CD in the system board package also comes with the VIA
Service Pack. The service pack includes the following drivers.
• VIA ATAPI Vendor Support Driver
• AGP VxD Driver
• IRQ Routing Miniport Driver
• VIA INF Driver
To install the drivers, insert the CD into a CD-ROM drive. The
autorun screen (Main Board Utility CD) will appear. Click the "VIA
Service Pack" button. For installation instructions or information, click
the "Read Me" button in the autorun screen.
® ® ® ® ®
95, Windows
® ® ® ® ®
® ® ® ® ®
ME, Windows
Supported Software
® ® ® ® ®
98, Windows
2000 or Windows NT
4
® ® ® ® ®
® ® ® ® ®
4.0
81
Advertisement
Table of Contents
