Table of Contents
Advertisement
Important:
If you are using more than one DIMM, make sure you insert
the same type of DIMMs into the DIMM sockets. Using
different types (VCM or PC SDRAM) of DIMMs may cause
problems.
BIOS Setting
Configure the system memory in the Advanced Chipset Features
submenu of the BIOS.
Installing the DIMM
A DIMM simply snaps into a DIMM socket on the system board.
Pin 1 of the DIMM must correspond with pin 1 of the socket.
Tab
Pin 1
1. Pull the "tabs" which are at the ends of the socket to the side.
2. Position the DIMM above the socket with the "notches" in the
module aligned with the "keys" on the socket.
3. Seat the module vertically into the socket. Make sure it is
completely seated. The tabs will hold the DIMM in place.
Notch
Key
Hardware Installation
2
Tab
15
Advertisement
Table of Contents
