Table of Contents
Advertisement
Chapter 3 - BIOS Setup
Award BIOS Setup Utility
The Basic Input/Output System (BIOS) is a program that takes care
of the basic level of communication between the processor and
peripherals. In addition, the BIOS also contains codes for various
advanced features found in this system board. This chapter explains
the Setup Utility for the Award BIOS.
After you power up the system, the BIOS message appears on the
screen and the memory count begins. After the memory test, the
following message will appear on the screen:
If the message disappears before you respond, restart the system or
press the "Reset" button. You may also restar t the system by
pressing the <Ctrl> <Alt> and <Del> keys simultaneously.
When you press <Del>, the main menu screen will appear.
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
Esc
: Quit
F10
: Save & Exit Setup
Standard CMOS Features
Use the arrow keys to highlight "Standard CMOS Features" and
press <Enter>. A screen similar to the one on the next page will
appear.
Press DEL to enter setup
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
Time, Date, Hard Disk Type...
Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
↑↓→←
: Select Item
BIOS Setup
3 3
47
Advertisement
Table of Contents
