Pedal Replacement - Matrix r7xi-02 Service Manual

CHAPTEr 9: PArT rEPlACEMENT gUiDE

9.12 PEDAl rEPlACEMENT

1) Use a 15 mm commercial pedal wrench to remove the pedal from the crank (Figure A). note: For the right side pedal, the threads are
normal. For the left side pedal, the threads are reversed (the pedal turns off counterclockwise).
figUrE A
2) Remove the pedal (Figure B).
figUrE B
3) Reverse Steps 1-2 to install a new pedal. note: Be sure to tighten the pedal as much as possible onto the crank with a commercial pedal
wrench (available from Matrix - part # ZMS4001254).
99